Page 3
PRECAUTIONS Prior to installation, use or maintenance activities, carefully read this user manual and follow the provided guidelines. Prior to the first use, carefully read this user manual. Use the weighing device only as intended. Place weighed loads in the centre of the weighing pan. Load the weighing pan with loads of gross weight which does not exceed the maximum capacity.
2. WARRANTY CONDITIONS A. RADWAG feels obliged to repair or exchange all elements that appear to be faulty by production or by construction. B. Defining defects of unclear origin and means of their elimination can only...
C. RADWAG does not bear any responsibility for damage or losses resulting from unauthorized or inadequate performing of production or service processes. D. The warranty does not cover: mechanical damage caused by product exploitation other than intended, damage of thermal and chemical origin, damage caused by lightning, overvoltage in the power network or other random event, ...
In case of any sign of damage, it is necessary to disconnect the device form the mains immediately. The damaged component must be replaced or repaired by RADWAG service directly. In case of any problems with correct operation of the scale, contact the closest manufacturer's service point.
The user is NOT ALLOWED to carry out any kind of repair of the device himself/herself. Any attempt of scale modification, repair etc., by unauthorized persons, will result with loss of validity of manufacturer-issued certificates, declarations and warranty. 5. RECYCLING HY10 scales must be recycled, they are not to be treated as a regular household waste.
6.4. Operation Panel Figure 4. Operation panel of WTC series scales Keys: Press to switch the weighing device on/off – hold the key for about 1 second. Function key, press to change the working mode. Press to send the weighing result to a printer or computer.
Install the weighing pan and the draft shield, follow figure 5. Figure 5. Scale assembly 7.2. Levelling To level the weighing instrument turn its feet. Keep turning the feet until the air bubble takes central position: 7.3. Connecting the Scale to the Mains The weighing device can be connected to the mains only with a power supply that comes standard with the particular model.
Display test proceeds (all symbols are backlit for a moment), program name and number is displayed first, ZERO indication with reading unit next (displayed reading unit is conditioned by scale type). In case the weighing result is not zero after indication stabilisation, press key.
-Err5- Battery error. Battery is damaged. Next, the home screen is displayed automatically. 8. OPERATING THE MENU In order to navigate the program menu use the operation panel. Press to enter the main menu. Press to enter tare manually. Press to enter tare from tare database.
Load weighing steadily avoiding mechanical shocks. Place weighed loads centrally on the weighing pan (eccentricity errors are specified by EN 45501 standard, point 3.6.2.). Do not apply concentrated force (total load in one point). Avoid side loading, in particular side shocks.
Figure 7. Scale - printer cable (EPSON) 11. TECHNICAL SPECIFICATIONS For technical specifications of respective scales go to RADWAG website www.radwag.pl. 12. TROUBLESHOOTING Problem Cause Solution Power supply disconnected. Connect the power supply to the scale. Connect the power supply to the mains, Battery discharged.
Incorrect printer port set in Enter < P5.ducE / 5.2.Prtr> submenu and <5.2.1.Prt> parameter. set correct <5.2.1.Prt> parameter value. printout Incorrect transmission Enter <P4.Conn> menu and set correct scale-connected parameters for the selected transmission parameters for the selected printer. printer port. printer port.