Hex Dump Mode; Resetting The Printer - Epson EPL-N2700 Reference Manual

Hex Dump Mode

Hex Dump Mode (also called data dump) is a special feature that
makes it easy for experienced users to find the cause of
communication problems between the printer and the computer.
In the Hex Dump Mode, the printer produces an exact printout
of the codes it receives.
1. Make sure the paper is loaded and the printer is off.
2. Hold down the Form Feed button while you turn on the
printer. Make sure you hold the button down until you see
the message HEX Dump on the LCD panel.
3. Run any program that causes the printer to print. Your printer
prints out all the codes it receives in hexadecimal format.
4. To turn off the Hex Dump Mode, turn off the printer or reset
it by pressing and holding the ALT and Continue buttons at
the same time. When Reset All appears on the LCD panel,
release the buttons.

Resetting the Printer

There are two ways to reset (return to a fixed set of conditions)
the printer.
Reset
Reset the settings for the current emulation mode and interface
by holding down ALT and Reset until Reset appears on the LCD
panel. You can reset the printer anytime a printout is not being
sent on the interface you are using.
Troubleshooting
6-29