Binding Of Radio Transmitter And Receiver - ProFlight PFBD101 User Manual

Binding of Radio Transmitter & Receiver
When pairing up, the below procedure should
be followed one drone at a time. Do not turn
on the second drone, until the first has been
paired.
1. Place the aircraft on a flat surface and
insert the lead from the battery into the
socket on the rear of the drone.
2. Turn on the controller.
3. The controller will beep twice, and the red LED will flash. Pair it to the
drone by pushing the throttle stick to the top, it will bleep, and then pull
the throttle stick to the bottom.
4. The long bleep indicates it is paired, the process can then be repeated
for the second drone, and you are then ready to fly.
7 of 13