Preparing For First Flight; Binding Of Radio Transmitter And Receiver; Sensitivity - ProFlight ECHO PFBD77 User Manual

Preparing for First Flight

1. Make sure both the transmitter and aircraft batteries are sufficiently
charged.
2. Find a suitable place to fly the aircraft, away from people, buildings and
vehicles.
3. Make sure the throttle stick is centred before turning on the transmitter.
Binding of Radio Transmitter & Receiver
1. Place the aircraft on a flat surface and insert the battery into the aircraft.
2. Turn on the controller.
3. The lights on the aircraft will flash repeatedly, hold the left stick down
until the transmitter binds with it. At this point the lights will illuminate
and stay on.
4. The aircraft is ready to fly.
The aircraft can be flown using either the radio control supplied or by using the
App on a smart device. For details on flying with the App, see page 14.

Sensitivity

The aircraft has 3 levels of sensitivity – High, Medium and Low. To change the
sensitivity, click the speed button. The controller will beep once when in Low
mode, twice when in medium mode and three times when in high mode.
9 of 16