Preparing For First Flight; Binding Of Radio Transmitter And Receiver; Gyro Calibration - ProFlight Wraith PFBD104 User Manual

Preparing for First Flight

1. Make sure both the transmitter and aircraft batteries are sufficiently
charged.
2. Find a suitable place to fly the aircraft, away from people, buildings and
vehicles.
3. Ensure the Gyro and Compass are calibrated before use.
4. Make sure the throttle stick is centred before turning on the transmitter.
Binding of Radio Transmitter & Receiver
1. Place the aircraft on a flat surface and
insert the battery into the aircraft, the
aircraft will start to bleep. Turn it on using
the button on the underside, before
placing back on the level surface, the
lights on the drone will flash

Gyro Calibration

When first used the gyroscope must be
calibrated. To do this, place the drone on
a level surface, push the left stick to the
top left, and the right stick to the bottom
right. The lights on the drone will flash
while calibration is in process, and will be
constant when calibration is successful
2. Turn on the controller.
3. Pair it to the drone by pulling the
throttle stick down and releasing
4. After a few seconds the drone will
pair and the lights on the drone will
become constant
9 of 18