Preparing For First Flight; Binding Of Radio Transmitter And Receiver - ProFlight TRACER PFBD97 User Manual

Preparing for First Flight

1. Make sure both the transmitter and aircraft batteries are sufficiently
charged.
2. Find a suitable place to fly the aircraft, away from people, buildings and
vehicles.
3. Make sure the throttle stick is centred before turning on the transmitter.
Binding of Radio Transmitter & Receiver
control supplied or by using the App on a smart device. For details on flying
with the App, see page 14.
1. Place the aircraft on a flat surface and
insert the battery into the aircraft, and
connect it to the lead from the drone. Tuck
the wire into the space above the battery, and
close the flap.
3. Turn on the drone by pressing the button on
the underside. Then place it on a level surface
4. Push the throttle lever up, and then down. The
controller will bleep, and the lights on the drone
will stop flashing, and will be lit.
5. The aircraft is now ready to fly.
The aircraft can be flown using either the radio
7 of 14
2. Pull the left throttle
lever down and turn on the
controller