Binding Of Radio Transmitter And Receiver; Propeller Installation - ProFlight Challenger User Manual

Binding the Transmitter to the Aircraft
1. Connect the battery to the aircraft, the lights on the aircraft will
illuminate.
2. Set the left control stick all the way down and then turn on the
controller, it will beep and the lights will illuminate.
3. Slowly move the left control stick up, the controller will beep and
the camera LED will go out. Return the left control stick to the
bottom.
4. The controller is now connected

Propeller Installation

Should you need to replace the propellers you must make sure that you
replace them in the correct orientation or the aircraft will not fly. Use the
above diagram to assist when replacing propellers.
6 of 11