Table of Contents
Advertisement
Flight Adjustment
When you lift the Drone into the air, if the aircraft drifts in a particular
direction you can trim the controls using the trim buttons. Select the trim key
opposite the direction of drift. Trimming is always needed before your first
flight.
On the Right Directional Pad:
If the drone drifts left, tap the Right Directional Trim button until the drifting
stops. If it drifts right, the Left Directional Trim Button should be pressed until
drifting stops
If the drone drifts forward, tap the Down Directional Trim button until the
drifting stops. If it drifts backwards, the Up Directional Trim Button should be
pressed until drifting stops
On the Left Directional Pad:
If the drone spins anti clockwise, tap the Right Directional Trim button until the
drifting stops. If it spins clockwise, the Left Directional Trim Button should be
pressed until drifting stops
9 of 13
Advertisement
Table of Contents
