Calling A Party From The Web Access Application; Receiving Calls; Call Handling Features - Avaya 4610SW User Manual

Using Your 4610SW IP Telephone

Calling a party from the Web Access Application

Your 4610SW's optional Web Access application can automatically dial Web links designated
as phone numbers by the Web page author. To call a party using a Web link, just select that link.
Note:
If your administrator has set up the Enhanced Dialing feature, selecting a link to
Note:
call a party causes the 4610SW to automatically add any appropriate digits (such
as those required to get an outside line) to phone numbers. If you select a call
link, but the call does not go through, check with your Telephone Administrator to
ensure that the Enhanced Dialing feature is set up properly for your environment.

Receiving Calls

When someone calls you and the Phone screen is active, the Bell (
phone rings and (if so administered) the Voice Message light flashes. When the Phone screen
is active, call information displays on the incoming call appearance line. If the Phone screen is
not active, call information appears on the top display line.
To receive the call, pick up the handset, activate the headset, or press the Speaker button
and talk.
Note:
You can set an option for whether the Phone screen displays when you receive
Note:
an incoming call, or whether the current screen remains displayed. You can also
set an option to flash the Message Waiting Lamp when the phone rings. See
Application Options

Call Handling Features

The features described in this section are available while calls are in progress. Use the
dedicated Feature buttons on the telephone itself, or administered Feature buttons available
using the 4610SW's softkeys, as applicable.
26 4610SW IP Telephone User Guide
in Chapter 6: 4610SW IP Telephone Options
) icon appears as the
for details.