Table 5. 9135 Interface Module Leds - Canoga Perkins EdgeAccess 9135 SNMP User Manual

Table 5. 9135 Interface Module LEDs

LED
Tx (Transmit)
Lnk (Link)
Col (Collision)
Rx
Fdx
Par (Partition)
Aut (Auto-negotiation)
100 (100 Mbps speed)
Pse (Pause)
Dis (Disabled)
LLE (Link Loss Echo)
LLF (Link Loss Forward) Off
EdgeAccess Universal Chassis System
Status
Off No transmit activity
Green Current transmit activity
Red Transmitter disabled due to LLF or LLE
Off No optical link
Green Optical link established
Amber Collision occurred
Off No data collisions
Off No receive activity
Green Current receive activity
Red Remote fault detected (FX interface, only)
Off Operating as half-duplex
Green Operating as full-duplex
Off Operating normally
Red Receiving too much data
Off Auto-negotiation disabled
Green Auto-negotiation enabled
Off Operating at 10 Mbps
Green Operating at 100 Mbps
Off Operating normally
Amber Receiving too much data or too fast
Off Operating normally
Red Interface disabled
Off Link Loss Echo disabled
Green Link Loss Echo enabled
Link Loss Forward disabled
Green Link Loss Forward enabled
Model 9135 10/100/1000
Indicates
2-5