Fdb Log Screen; Figure 25. Traps Log Screen - Canoga Perkins EdgeAccess 9135 SNMP User Manual

Count Time 0 days 00:11:07
1
2
Of: 2

Figure 25. Traps Log Screen

All users and managers can view the traps log screen, but only supervisors can configure the traps on
the Host Table / SNMP Settings; for details, see Section 3.4.2.
The 9135 reports these traps:
•
Cold Start
•
Warm Start
•
Link Up
•
Link Down
•
Authentication Fail
•
EGP Neighbor Loss
•
Remote Fault
•
Topology Change
•
New Root

3.7.3 Fdb Log Screen

The Fdb Log lists the MAC addresses that each port currently knows. See Figure 26. To access the
Fdb Log, follow these steps:
1. From the Main Menu, type 4, Reports, and press <Enter>. The Reports menu appears.
2. From the Reports Menu, type 3, Fdb Log, and press <Enter>. The Fdb Log screen appears.
3-18
EdgeAccess Universal Chassis System
Traps Log
0 days 00:00:00
0 days 00:00:01
1. View Previous Page
2. View Next Page
3. Clear The Log
4. Main Menu
Model 9135 10/100/1000
Trap Type
Cold Start ()
Link Up (1)