Ip Settings; Figure 9. Ip Settings; Table 7. System Menu Options - Canoga Perkins EdgeAccess 9135 SNMP User Manual

Table 7. System Menu Options

Menu Item

1. IP Settings

2. Host Table / SNMP Settings
3. SLIP Port Settings
4. Passwords
5. Network Name
6. Main Menu
3.4.1 IP Settings
Use the IP Settings menu to view and update the IP parameters and configuration for the 9135. To
access the IP Settings menu, see Figure 9 and Table 8 and follow these steps:
1. From the System Menu, type 2, IP Settings, and press <Enter>.
2. At the prompt, type the number for a parameter, follow the prompts to update it, then press
<Enter> to confirm it. For details, see Table .
Local MAC Address
1. Local IP Address
2. Gateway IP Address
3. Subnet Mask
4. Aging time
5. Enable Download
6. Enable BOOTP Mode
7. Management VLAN Number
8. Management VLAN Enabled
9. Static ARP Table
10. Dynamic ARP Table
11. Main Menu

Figure 9. IP Settings

3-4
EdgeAccess Universal Chassis System
Set the IP parameters
Set up the Host Table and SNMP access
Set up for Serial Line Interface Port (SLIP) access
Set passwords for supervisor, manager, and user levels
At the prompt, set the name of the network where the
9135 resides
Return to the Main Menu
IP Settings
: 00 40 2A 00 53 D1
: 172.16.142.74
: 172.16.1.1
: 255.255.0.0
: 300
: TFTP and FTP
: no
: 1
: no
Model 9135 10/100/1000
Description