3.7
Reports
The Reports Menu provides access to a brief description of the 9135, the traps log, and the Fdb log.
See Figure 23.
Reports
1.
Description
2.
Traps Log
3.
Fdb Log
4.
Main Menu
Figure 23. Reports Menu
3.7.1 Description Report Screen
The Description screen lists the device type, software revisions stored in the Flash 1 and Flash 2
memory locations and which revision is active, and the time since last restart. See Figure 24. To
access the Description Report, follow these steps:
1. From the Main Menu, type 4, Reports, and press <Enter>. The Reports menu appears.
2. From the Reports Menu, type 1, Description, and press <Enter>. The Description screen appears;
see Figure.
Device Type
Software Revision Flash1 : 1.00
Software Revision Flash2 : 1.22
Time Since Last Restart
1. Main Menu
Figure 24. Description Screen
3.7.2 Traps Log Screen
The traps that the 9135 reports are predefined. The Traps Log screen reports each trap and when it
occurred in relation to the total operating time since the last system restart or reset. You can view the
next or previous page or clear the log. See Figure 25. To access the Traps log, follow these steps:
1. From the Main Menu, type 4, Reports, and press <Enter>. The Reports menu appears.
2. From the Reports Menu, type 2, Traps Log, and press <Enter>. The Traps Log screen appears.
EdgeAccess Universal Chassis System
Description
: 9135 10/100/100 Switch
: 0 days 00:10:29
Model 9135 10/100/1000
(active)
3-17