Table of Contents
Advertisement
Model number
Status reports
Change options
Figure 5. Typical 9135 Screen
Not all screens and menus provide options that you can change. Some menu items reach screens that
only report status, such as revision numbers, module type, or alarms. On other screens, you can move
through and select options, and enter data.
Use these keys to navigate the screens:
•
Space bar When a menu item is highlighted, press <Space> to cycle through all options for that
item.
•
Tab Press <Tab> to move the highlight to the next column to the right.
•
Enter Press <Enter> to select the highlighted option for a menu item.
•
Escape Press <Esc> to return to the previous screen.
3.3
Using the 9135 Management Program
The first screen is the Login Menu. See Figure 6. To access the system and reach the Main Menu,
follow this step:
Welcome to the EdgeAccess 9135 10/100/1000 Switch Module
Please Enter Login Password:
Figure 6. The 9135 Login Menu
1. If this is your initial setup and no password has been set, press <Enter> instead of a password. If
a password has been set, enter the password for Supervisor, Manager, or User, and press <Enter>.
The Main Menu appears. See Figure 7.
Note: After 10 minutes of inactivity, the software automatically logs the user out.
3-2
EdgeAccess Universal Chassis System
Login Menu
Model 9135 10/100/1000
Chassis and slot numbers
Screen navigation
instructions
Messages and
urgent status
Advertisement
Table of Contents
