Table of Contents
Advertisement
Chapter 5
Specifications
5.1
Switch Specifications
Switching Characteristics
Bridging:
Address Table:
Forwarding Rate:
Buffer Memory:
Management Board Characteristics
In-Band Support:
MIBs Supported:
Terminal Port:
SLIP (Modem) Port:
Software Download:
Network IP Configuration: BOOTP or User Entry
Alarms
General:
Relay Per Port:
Physical/Environmental
Dimensions:
Weight:
Operating Temperature:
Humidity:
Power:
EdgeAccess Universal Chassis System
Per IEEE 802.1d
Spanning Tree
Maximum 1000 MAC addresses entry
148,800 packets-per-second maximum per port
1 MB per port
SNMP, TELNET, TFTP, FTP, BOOTP
MIB II, Bridge MIB, Private MIB (contains RMON group 1 counters)
EIA-232, DTE, DE-9 female connector, VT100 compatible
EIA-232, DCE, DE-9 male connector, Modem control or SLIP
TFTP
Per port relay activated by:
•
Unit Power Fail
•
Link Loss
•
Remote Fault
Three dry contacts (common, normally open, normally closed) on rear
panel
Contact current: 30 VDC Max., 1A
Screw-terminal strips
17.25"W x 13.375"L x 1.75"H [1U] (438 mm x 340 mm x 44 mm)
5.5 lbs (2.5 kg)
32° to 122° F (0° C - 50°C)
Up to 90% noncondensing
AC: 85-260 VAC, 50/60 Hz
DC: 36 to 72 VDC
Model 9135 10/100/1000
5-1
Advertisement
Table of Contents
