Skyrc Q200 Instruction Manual page 27

SAVE PROGRAM
SAVE......
[ BATT MEMORY 1 ]
LiPo


7.4V (2S)
[ BATT MEMORY 1 ]
C:4.9A D:2.2A
BATT/PROGRAM
BATT MEMORY
[ BATT MEMORY 1 ]
LiPo 11.1V(3S)
LiPo BALANCE
2.5A 11.1V(3S)
Q200
Battery Memory Set and Call Out
Saving
Indicates the battery type and battery cell of the saved profile.
Indicates the charge and discharge current of the saved profile.
2. Battery Memory Recall
From the BATT/PROGRAM menu use the INC or DEC buttons
to scroll to the BATT MEMORY program and press START
button to enter the battery memory program.
Use the INC or DEC buttons to scroll through the memories
and select the desired program memory. Press the START
button to confirm the selection.
Press the START button again and hold it to recall the selected
memory.
Press and hold the START button for 3 seconds to start the
program.
25 ·