Power Distribution - Skyrc Q200 Instruction Manual

Power Distribution

1) Operating in AC mode
SKYRC Q200 comes with a built-in switching power supply. You can connect
the AC power cord directly to the AC mains socket. (100-240V AC).
In AC mode, it supports Power Distribution. You could set the AC Max Power for
one channel (Take Channel A for example) as follows,
BATT/PROGRAM
A
SYSTEM SETTING->
LIPO BALANCE
B
2.0A
LIPO BALANCE
C
2.0A
LIPO BALANCE
D
2.0A
AC Max Power Set
A
LIPO BALANCE
B
2.0A
AC Max Power Set
C
LIPO BALANCE
D
2.0A
And the other channel (Channel C) will take the remaining power automatically (For
example, if you set Channel A as 65W, the Channel C will be 35W).
1:
If Channel A and Channel C are both charging, you can't change the power
If Channel A is charging, you can change AC power of Channel C and Channel A will
2:
take the remaining power automatically.
2) Operating in DC mode
Please connect SKYRC Q200 to AC/DC power supply with the supplied DC input
cable. You could also use terminal clips with DC connectors and attach them directly
to 12V car batteries. It is critically important that you use either a fully charged 13.8V
car battery or a high quality AC/DC power supply in the range of 11-18V DC output
with minimum power 400W or higher to ensure reliable performance.
Important Notice
Low quality DC power source may damage your
Q200 charger. We recommend using EFUEL
30A/540W Power Supply (SK-200013).
· 14
ENTER
7.4V(2S)
7.4V(2S)
7.4V(2S)
65W
Press INC
or DEC
button
7.4V(2S)
35W
7.4V(2S)
Safety Timer
A
ON 120Min
LIPO BALANCE
B
2.0A 7.4V(2S)
LIPO BALANCE
C
2.0A 7.4V(2S)
LIPO BALANCE
D
2.0A 7.4V(2S)
AC Max Power Set
A
50W
LIPO BALANCE
B
2.0A 7.4V(2S)
AC Max Power Set
C
50W
LIPO BALANCE
D
2.0A 7.4V(2S)
Press DEC
button 3
times and
push ENTER
button
distribution
.
Q200