Skyrc Q200 Instruction Manual page 7

Special Features
Supports Various Types of Lithium Batteries
SKYRC Q200 supports various types of lithium batteries, such as LiPo, LiIon and the new
LiFe series of batteries.
LiHV Mode Available
The additional LiHV mode is able to charge the new generation of LiPo and LiIon
batteries with a higher end of charge voltage (4.35V).
Fast Charge Mode and Storage Mode of Lithium Battery
Special modes for specific needs. Fast Charge reduces the duration of charging. Storage
Mode lets you control the final voltage of your battery as preparation for long time storage
in order to prolong the usable lifetime of the battery.
Re-Peak Mode of NiMH/NiCd Battery
In re-peak charge mode, the charger can peak-charge the battery once, twice or thrice in
a row automatically. This is good for making certain the battery stays fully charged.
Delta-peak Sensitivity for NiMH/NiCd
Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination algorithm
based on the principle of the Delta-peak voltage detection. When the battery voltage
exceeds the threshold, the charger terminates the charge process automatically.
Cyclic Charging/Discharging
A continuous process of up to 5 cyclic Charge>Discharge or Discharge>Charge for
refreshing or balancing batteries to simulate real life battery performance.
Automatic Charging Current Limit
You can set the upper limit of the charging current when charging your NiMH or NiCd
battery. The 'AUTO' charging mode, however, is recommended when charging NiMH
batteries with low impedance and capacity.
LiPo Battery Voltage Meter
The user can check battery pack total voltage, the highest cell voltage, the lowest cell
voltage and all other cell voltages.
Battery Internal Resistance Meter
The user can check battery's total internal resistance and each cell's internal resistance.
Q200 05 ·