Mounting; Mounting Of The Mounting Bracket - Panasonic SF4B-F31G(V2) Instruction Manual

2-4 Mounting

2-4-1 Mounting of the Mounting Bracket

<Reference>
● Mount the emitter and the receiver at the same level and parallel to each other. The effective aperture
angle of this device is ±2.5° or less for a sensing distance of 3m or more.
● Unless otherwise specified, the following mounting procedure is common for both emitter and receiver. For the
preparation of the mounting, prepare the mounting holes on the mounting surface by referring to "6-3 Dimensions."
<In case of using standard ell mounting bracket (MS-SF4BG-1) (optional)>
1. Temporary joint with two of hexagon-socket head bolts for horizontal angle adjustment [M5 (length: 10mm)]
2. Mount the standard ell mounting bracket on mounting surface with two of hexagon-socket
head bolts [M5 (purchase separately)] or one of [M8 (purchase separately)].
Hexagon-socket head bolt
[M5 (purchase separately)]
3. After light axis adjustment, tighten two of hexagon-socket head bolts for horizontal angle
adjustment [M5 (length: 10mm)]
The tightening torque should be 3N･m or less.
Note: For the models that the intermediate supporting bracket (MS-SF4BG-2) is enclosed with, be sure to use the
intermediate supporting bracket (MS-SF4BG-2). For details, refer to <In case of using intermediate
supporting bracket (MS-SF4BG-2) (accessory)>.
22
● For selecting the appropriate mounting bracket matched to the installation nvi-
ronment, the mounting bracket is not incorporated in this device. Please pur-
chase the optional mounting bracket to fit on the mounting environment.
● Do not apply the load such as forced bending to the cable of this device. Apply-
ing improper load could cause the wire breakage.
● The minimum bending radius of the cable is R6mm. Mount the device consider-
ing the cable bending radius.
Hexagon-socket head bolt
[M5 (length: 10mm)]
Main body
Main body
standard ell mounting bracket
(MS-SF4BG-1) (Optional)
Hexagon-socket head bolt
[M8 (purchase separately)]
Main body
© Panasonic Industrial Devices SUNX Co., Ltd. 2017