Panasonic SF4B-F31G(V2) Instruction Manual page 84

Notes: 1) The beam channel is not turned OFF during muting even if it is blocked.
2) In case the blanking function is valid, the operation mode is changed.
3) Do not use or storage in environment of atmospheric pressure or more.
4) The cable can be extended within 30m (for emitter / receiver) when two devices are connected in series
connection, within 20m when three devices are connected in series connection. Furthermore, when the
muting lamp is used, the cable can be extended within 40m (for emitter / receiver).
5) The intermediate supporting bracket (MS-SF4BG-2) is enclosed with the following devices. The quantity
of the enclosed bracket differs depending on the device as follows:
1 set: SF4B-F□G<V2> ... 79 to 127 beam channels
SF4B-H□G<V2> ... 40 to 64 beam channels
SF4B-A□G<V2> ... 20 to 32 beam channels
2 sets: SF4B-H□G<V2> ... 72 to 96 beam channels
SF4B-A□G<V2> ... 36 to 48 beam channels
<Reference>
Refer to "3-9 Functions Using Handy Controller (SFB-HC) (Optional)" for details related to the function
setting, or to the instruction manual attached to handy.
84
This device enables to set each function by using the handy controller (SFB-HC)
(optional). Among the functions, the contents related to the safety distance such
as the size of the minimum sensing object are varied depending on the setting
condition. When setting each function, re-calculate the safety distance, and make
enough space larger than the calculated safety distance. Failure to do so might
cause the accident that the device cannot stop quickly before reaching the dan-
gerous area of the device, resulting in the death or serious injury.
Both emitter and receiver are adjusted before shipment, please apply both emitter
and receiver with the same serial No. The serial No. is indicated on the plates of
both emitter and receiver. (Under the model represents the serial No.)
© Panasonic Industrial Devices SUNX Co., Ltd. 2017