Panasonic SF4B-F31G(V2) Instruction Manual page 23

<In case of using intermediate supporting bracket (MS-SF4BG-2) (accessory)>
1. Insert a slot nut (accessory of intermediate supporting bracket) to back side of this product.
2. Fix the slot nut inserted on back side of this product and the intermediate supporting bracket
with a hexagon-socket head bolt [M5 (length: 8mm)].
The tightening torque should be 3N·m or less.
About mounting position of intermediate supporting bracket, refer to "6-3 DIMENSIONS".
3. Insert and fit the intermediate ell mounting bracket to concave portion of intermediate sup-
porting bracket.
4. Mount the intermediate ell bracket on the mounting surface with two of hexagon-socket head
bolts [M5 (purchase separately)] or one of [M8 (purchase separately)].
Hexagon-socket head bolt
[M5] (purchase separately)
<Reference>
● In case using hexagon-socket head bolts [M8] to mount the Intermediate
ell bracket. Temporary joint the Intermediate ell bracket before conduct
step 3.
● In case the wight is on the mounting surface vertically or vibrated vertically, the mounting of the interme-
diate ell bracket is not
© Panasonic Industrial Devices SUNX Co., Ltd. 2017
Main body
Slot nut
(Accesorry of intermediate supporting bracket)
Intermediate supporting bracket
(Accesorry of intermediate supporting bracket)
Intermediate supporting bracket
(Accesorry of intermediate supporting bracket)
Intermediate ell bracket
Accesorry of intermediate
supporting bracket
Slide
required.
Intermediate
supporting bracket
Slot nut
(Accesorry of intermediate supporting bracket)
Hexagon-socket head bolt
[M5 (length: 8mm)]
<Inseted state>
<Example>
In case the wight is on side of this product shown below,
mount the intermediate ell bracket to hold this product.
Load
Beam-axis side
Beam-axis side
Vibration
and load
Mounting
surface
Intermediate
supporting bracket
Mounting surface
Intermediate ell bracket
Hexagon-socket bolt [M8]
(purchase separately)
23