Panasonic SF4B-F31G(V2) Instruction Manual page 87

● Connecting cable exclusive for the application expansion unit SF-C14EX: 2 pcs./set
Type Model No.
SFB-CB05-EX
SFB-CB5-EX
Connector
SFB-CB10-EX
● Compatible cable: 2 pcs./set
Type Model No.
SFB-CB05-A-P
SFB-CB05-A-N
Connector
SFB-CB05-B-P
SFB-CB05-B-N
● Wire-saving Y type connector: 1 pcs
Model No.
SFB-WY1
● Standard ell mounting bracket: 4 pcs./set
Model No.
For two hexagon-socket head bolts [M5]
MS-SF4BG-1
or one hexagon-socket head bolt [M8].
© Panasonic Industrial Devices SUNX Co., Ltd. 2017
Cable length
0.5m
5m
10m
Cable length
0.5m
This device is connector which can organize a emitter and a receiver cables of intermediate
when connecting to a control unit SF-C13 or a safety PLC, it is allowed to connect as wire-
saving.
use it with a cable shown below.
• Cable with connector on one end WY1-CCN3, WY1-CCN10: 1 pc.
Remarks
This cable is used for connecting the device to the applica-
tion expansion unit SF-C14EX (optional).
For emitter: Gray connector, 8-core shielded cable
For receiver: Black connector, 8-core shielded cable
This cable is compatible with, PNP output of SF4-AH series.
This cable is compatible with, NPN output of SF4-AH series.
This cable is compatible with, PNP output of SF2-EH series.
This cable is compatible with, NPN output of SF2-EH series.
Remarks
● Dead zoneless mounting bracket: 4 pcs./set
Model No.
MS-SFBG-3
Remarks
Remarks
Remarks
This is the mounting bracket for
reducing the dead space.
87