Part Ii Web-Based Operations; Before You Begin; Login; Live View - UNIVIEW NVR201-04E User Manual

CAUTION!
Unsaved settings will be lost if the NVR is shut down unexpectedly, for example, due to a power
failure. An incorrect shutdown during a system upgrade may cause startup failures.

Part II Web-Based Operations

1

Before You Begin

The figures are for illustration purpose only and may vary with the NVR model.
NOTE!
The parameters that are grayed out on the Web GUI cannot be modified. The parameters and
values displayed may vary with the NVR model.
2

Login

1. Open a Web browser on your computer, input the IP address (192.168.0.30 by default) in the
address bar and then press Enter.
You may need to install a plug-in as prompted at your first login. Close the Web browser when
the installation starts.
2. In the login dialog box, enter the correct username and password (123456 for admin) and then
click Login.
CAUTION!
The default password 123456 is intended only for your first login and should be changed
immediately after login to ensure account security.
3

Live View

The Live View page is displayed when you are logged in. The following figure shows an example.
69