UNIVIEW NVR201-04E User Manual page 23

2. The system automatically performs a quick search. You may click Refresh to search and refresh
again.
NOTE!
To search for IP devices on a specified network segment, click Search.
3. Click to add the desired IP device.
Clicking One-click Add will add all the discovered IP devices, as long as the total number does

not exceed the upper limit allowed by the NVR.
After clicking Custom Add, you may:

Select a discovered IP device and click Add to add it.
Complete settings for an IP device manually, including its IP address, and then click Add to add it.
NOTE!
For a multi-channel DVS, select the desired channels and then click OK to add cameras connected to
the DVS.
17