Configuring And Calling A Patrol Route - UNIVIEW NVR201-04E User Manual

3. Configure presets.
a. Use the directional buttons to rotate the PTZ camera to the desired position, select a preset
number that is not in use, and then click
b. To add more presets, repeat the above operations.
4. To call a preset, click
position.

Configuring and Calling a Patrol Route

NOTE!
Up to four patrol routes are allowed for each PTZ camera, and each patrol route can have up to
eight presets.
1. Click the desired preview window and then click
2. Click Set. The PTZ Management window is displayed.
3. Click
the duration (length of time the camera dwells on the preset) and the rotation speed as
required, and then click OK. Repeat this step to add all the key points for the patrol route.
for the desired preset number. The camera rotates to the preset
to add a keypoint. In the Preset Configuration window, select the desired preset, set
to save the preset.
on the toolbar.
25