Recording; Encoding Settings - UNIVIEW NVR201-04E User Manual

4. Click
NOTE!
The duration ranges from 0 to 1800 seconds, and the default is 10 seconds. The rotation speed

ranges from 1 to 9, and the default is 5.
and

and

move down.
is used to delete all the key points.

6

Recording

You can record video after finishing the basic configuration as described in

Encoding Settings

1. Click Menu > Camera > Encoding.
2. Select the desired camera and stream type, and then complete other settings. Three stream
types are provided:
Normal: main stream intended for scheduled recording.

Event: main stream intended for manual recording and recording triggered by specified events

such as alarm inputs or motion detection alarms. Encoding settings for this stream type also
apply to manual recording.
Sub Stream: intended for low resolution video in scenarios such as local monitoring or remote

monitoring on a mobile device.
for the desired patrol route to start patrol. To stop patrol, click
are used to modify and delete a preset respectively.
are used to adjust the sequence of key points. Click
26
.
to move upper, and click
Initial Configuration.
to