Manual Version:V1.03 NVR Quick Guide Welcome Thank you for choosing our product. This guide contains useful information about using the device. Please read through this guide before you start. Notice All operations should comply with your local electrical safety codes.
Page 2
Installation This NVR series has only one hard disk. Please follow the steps to install the disk. A screwdriver is needed. The following figures are only for illustration purpose. 1. Loosen the screws on the 2. Fix the four screws on the bottom cover.
LEDs Color Indication Steady blue The device is operating properly. Steady blue The device is connected to the network. Steady blue The device is connected to the cloud server. Blinking red The disk is reading or writing data. Interfaces The interfaces may vary depending on your device model. Local Login After the device starts up, use the default username (admin) and password (123456) to log in for the first time.
Page 4
CAUTION! The default password is intended only for your first login. To ensure account security, please change the password immediately when you are logged in. A strong password containing at least eight characters is recommended. Login from the Web Open a Web browser and enter the IP address of your device in the address bar.
Need help?
Do you have a question about the nvr201-08lp and is the answer not in the manual?
Questions and answers