Serial Port Configuration; User Configuration - UNIVIEW NVR201-04E User Manual

2. Enable DST by selecting the check box, and then set the start time, end time, and DST bias.
3. Click Apply to complete the configuration.

Serial Port Configuration

Serial port settings in the NVR should be consistent with those in the connected serial device. Serial
port configuration is required for PTZ control.
1. Click Menu > System > Serial.
2. Configure the parameters for the serial port.
NOTE!
You may set Port Usage to Keyboard to control a PTZ camera with a specialized surveillance
keyboard.
3. Click Apply to complete the configuration.

User Configuration

A user group is a collection of operation permissions in the system. When a user group is assigned to
a user, this user has all the permissions specified for the user group.
There are three user types in the system:
Admin: The default super administrator in the system and has full permissions. The initial

password for admin is 123456.
Operator: By default an operator has basic permissions and access to cameras.

Guest: By default a guest has access to cameras.

NOTE!
Only admin can add, delete and modify users.
1. Click Menu > System > User.
58