Shortcut Menu In Preview Window; Example Of Auto-Switch Operation - UNIVIEW NVR201-04E User Manual

Shortcut Menu in Preview Window

A shortcut menu appears (see figure in the table below) when you right-click in a preview window.
Table 3-4 Shortcut Menu Description
Menu
Single Screen
Multi-Screen
Corridor
Previous Screen
Next Screen
Start Auto-Switch
Stop Auto-Switch
Playback
Menu

Example of Auto-Switch Operation

Auto-switch requires you to configure the screen layout, windows, the linked cameras, and the auto-
switch interval.
This example describes how to configure auto-switch for five cameras based on a 4-window screen
layout.
1. Right-click anywhere in the preview window, and then click Multi-Screen > 4 Screens. Four
windows are displayed.
NOTE!
Depending on the model of your NVR, the number of windows that can be displayed may vary.
2. Right-click anywhere in the preview window and then click Start Auto-Switch. Auto-switch
starts to display four windows on the first screen and then the fifth window on the second
screen at the set interval.
Description
Select the desired camera for live video in
full screen.
Select the desired screen layout.
Click to view video in corridor mode in a
variety of windows.
Note: You may also click Menu > System >
Preview and select the desired corridor
layout from the Default Layout drop-
down list.
Switch to the previous or next screen.
Start or stop auto-switching one or
multiple preview windows.
Display the playback window.
Display the main menu.
11
Screenshot