Troubleshooting By Guide - Thermo Scientific Sorvall ST 8 Instruction Manual

Troubleshooting by Guide

If other problems occur than those listed in this table, the customer service has to be contacted.
Error number Error message
E-002; Read Manual
E-005;
E-008;
E-010;
E-011;
E-012;
E-015;
E-016;
E-034;
E-036;
E-041;
E-048;
E-050;
E-051;
E-052;
E-053;
E-054;
E-072;
E-077;
E-101;
E-104
E-031 Temp High!
E-017; Read Manual
E-020;
E-021;
E-022;
E-023
E-078;
E-079;
E-080;
E-081;
E-019 Rotor Unknown
Thermo Scientific
Troubleshooting
Restart the centrifuge.
If the error message appears again, inform the customer service.
CAUTION
Hot metal parts!
Check, if the centrifuge is accessible.
Be sure, that the room temperature is within the limits.
Let the centrifuge cool down for 15 minutes.
If the error message appears again, inform the customer service.
Wait until the rotor has stopped.
Check, if the rotor is qualified for the Sorvall ST 8 Centrifuge
(check "Rotor Selection" on page
Check, if the bottom of the rotor is damaged and if the rotor is
placed on the Auto-Lock correctly.
If the error message appears again, inform the customer service.
Restart the centrifuge.
Check, if the rotor is qualified for the Sorvall ST 8 Centrifuge
(check "Rotor Selection" on page
If the error message appears again, inform the customer service.
8
Troubleshooting
Troubleshooting by Guide
20).
20).
Sorvall ST 8 Centrifuge 55