Characteristics - Thermo Scientific Sorvall ST 8 Instruction Manual

1
Introduction and Description

Characteristics

Characteristics
The Thermo Scientific Sorvall ST 8 Centrifuge is an in-vitro diagnostics device according to the
In-Vitro Diagnostics Directive 98/79/EC.
Several rotors with a wide range of tubes can be used.
The set speed is reached within seconds. The maintenance-free induction motor ensures quiet and
low-vibration operation even at high speeds, as well as guaranteeing a very long lifetime.
The user-friendly control panel makes it easy to pre-set the speed, RCF value, running time,
temperature, and running profile (acceleration and braking curves). You can choose between the
display of speed and RCF or the entry mode.
These settings can be changed even while the centrifuge is running.
With the help of the PULSE key, you can also centrifuge a sample for just a few seconds.
The Thermo Scientific Sorvall ST 8 Centrifuge is equipped with various safety features:
• The housing and the interior consist of steel plate, the rotor chamber of stainless steel, while the
front panel is made of high-impact resistant plastic.
• The lid is equipped with a view port and a lock.
• The lid of the centrifuge can only be opened while the centrifuge is switched on and the rotor has
come to a complete stop. The centrifuge cannot be started until the lid has been closed properly.
• The integrated rotor detection systems ensures that no inadmissible speed settings can be
preselected.
• Electronic imbalance recognition
• Lid emergency release: For emergencies only, e.g. during power failures (see
Emergency Door Release"
16 Sorvall ST 8 Centrifuge
on page 54)
"Mechanical
Thermo Scientific