Aerosol-Tight Rotors; Aligning The Centrifuge - Thermo Scientific Sorvall ST 8 Instruction Manual

4
Operation

Aerosol-tight Rotors

Aerosol-tight Rotors
When using an aerosol tight lid the rotor can only be removed with the lid closed. This is to protect
you and the samples.
Figure 4.

Aligning the Centrifuge

• To turn off the centrifuge push the mains switch to "0".
38 Sorvall ST 8 Centrifuge
CAUTION Rotors supplied with a lid for aerosol-tight applications come with a mandrel,
which belongs to the Auto-Lock. Be sure not to place the lid onto this mandrel to prevent
it from being damaged.
Auto-Lock-lid for aerosol-tight rotors
WARNING Mind the Auto-Lock-mandrel inside the lid. Do not touch the mandrel.
Thermo Scientific