Entering Parameters - Thermo Scientific Sorvall ST 8 Instruction Manual

4
Operation

Entering Parameters

3. If available close the rotor with the rotor lid.
4. Close the centrifuge lid.
Entering Parameters
The Thermo Scientific Sorvall ST 8 offers you 2 profiles: standard and soft.
Press the ACCELERATION / DECELERATION key to set a profile. The LEDs show the chosen
settings. The last profile is saved, if you restart the centrifuge.
Settings
OFF
SOFT ACC
SOFT DEC
SOFT ACC/DEC
Table 2. Acceleration / Deceleration settings
32 Sorvall ST 8 Centrifuge
Be sure to check all sealings before starting any aeorsol-tight applications.
See the information in the rotor instruction manual.
Description
No Acceleration and Decelaration =
Standard
Acceleration = Soft.
Decelaration = Soft
Acceleration and Decelaration = Soft
Thermo Scientific