4
Operation
Switch on Centrifuge
Switch on Centrifuge
1. Turn on the power switch on the back of the device.
The device performs a self-check of its software.
a. When the centrifuge lid is closed the following display shows:
b. When the centrifuge lid is open the following display shows:
Open Lid
1. Press the OPEN key.
Close Lid
Close the lid by pressing down on it lightly in the middle or on both sides of it.
Note The lid should audibly click into place.
30
Sorvall ST 8 Centrifuge
The speed and time displays read 0.
The speed and time displays show the pre-set values.
WARNING Do not reach into the gap between the lid and the housing.
Use the emergency release only for malfunctions and power failures (see
Emergency Door Release"
on
page
54).
"Mechanical
Thermo Scientific