Pnp/Pci Configurations - Advantech ARK-3202V -S6A1E User Manual

When Enabled, the system resumes from suspend mode if an interrupt occurs.
The choices are "Enabled" and "Disabled".
PWRON After PWR-Fail [ON/Off/Former-Sts]
Use this to set up the system after power failure. The "Off" setting keeps the sys-
tem powered off after power failure, the "On" setting boots up the system after
failure, and the "Former-Sts" returns the system to the status before power fail-
ure.
3.2.9

PnP/PCI Configurations

Reset Configuration Data [Disabled]
The default is Disabled. Select Enabled to reset Extended System Configuration
Data (ESCD) if you have installed a new add-on card, and system configuration
is in such a state that the OS cannot boot.
Resources Controlled By [Auto(ESCD)]
The commands here are "Auto(ESCD)" or "Manual". Choosing "Manual"
requires you to choose resources from the following sub-menu. "Auto(ESCD)"
automatically configures all of the boot and Plug and Play devices, but you must
be using Windows 95 or above.
ARK-3202V User Manual 42