Advantech ARK-3202V -S6A1E User Manual page 49

Run VGA BIOS if S3 Resume [Auto]
This item allows the system to re-initialize the VGA BIOS after the system
resumes from ACPI S3 mode.
Power Management [User Define]
This item allows users to select system power saving mode.
Min Saving Minimum power management. Suspend Mode=1 hr.
Max Saving Maximum power management. Suspend Mode=1 min.
Allows users to set each mode individually. Suspend Mode= Dis-
User Define
abled or 1 min ~1 hr.
Video Off Method [DPMS]
This item allows users to determine the manner is which the monitor is blanked.
This option will cause system to turn off vertical and horizontal syn-
V/H SYNC+Blank
chronization ports and write blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Initial display power management signaling.
Video Off In Suspend [Yes]
This item allows users to turn off video when system is in suspend mode.
Suspend Type [Stop Grant]
This item allows users to determine the suspend type.
Suspend Mode [Disabled]
This item allows users to set a delay time. If system inactivity exceeds the delay
time, all devices except the CPU will be shut off.
Soft-Off by PWR-BTTN [Instant-Off]
This item allows users to define function of power button.
Instant-Off Press power button for instant power off.
Delay 4 Sec Press power button for four seconds to initiate power off.
CPU THRM-Throttling
The ability is control how much percent of your CPU's clock speed will be throt-
tled down when the CPU overheat. You can set "75.0%", "50.0%", and "25.0%".
PowerOn by LAN [Enabled]
This item allows users to power on the system via LAN. The choices are
"Enabled" and "Disabled".
PowerOn by Modem [Enabled]
This item allows users to power on the system by Modem. The choices are
"Enabled" and "Disabled".
PowerOn by Alarm [Disabled]
The choices are "Enabled" and "Disabled". If enabled, the fields that follow indi-
cate dates and times of alarm settings.
Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary IDE 0 (1)
or Secondary IDE 0 (1) becomes active. The choices are "Enabled" and "Dis-
abled".
FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if the FDD, inter-
face, COM port, or LPT port is active. The choices are "Enabled" and "Dis-
abled".
PCI PIRQ [A-D]#
41 ARK-3202V User Manual