Unlock The Front Panel; Ethernet Setup - Linear Acoustic AERO.2000 User Manual

AERO.2000 User Guide July 2016
5.3 Unlock 5.3

Unlock the Front Panel

the Front Panel
5.3 5.3 Unlock Unlock the Front Panel the Front Panel
When the unit is powered up you will see two meters on the left and the password lock screen
on the right. There is a blank password entry field at the top.
1. If it is not highlighted with a yellow border use the Up/Down arrows to highlight the
empty password field and then press the Right arrow. An ASCII entry screen will appear.
2. Use the Rotary to highlight the numeric keyboard selection [123] and press the Right
arrow
3. Use the Rotary to highlight each character in the password and press the Right arrow
after each selection. The factory password is 1234. The password will appear at the top.
The AERO.2000 MUST have a password. Erasing the password and saving
4.
will require the unit to be sent back to the factory to be unlocked! If you
change the password keep your password in a safe place.
5. Use the Rotary to highlight OK and press the Right arrow.
6. The screen is now back on the password screen. Use the Down arrow to highlight
Unlock and press Right arrow. The main menu screen is now visible.
7. Use Up/Down arrows to highlight Display Options at the bottom of the main menu and
press Right arrow
8. Use Up/Down arrows to highlight the Menu Options selection at the bottom of this
menu and press Right arrow
9. In this menu you can use the Rotary to, maximize the size of the menu area and the text
on the screen. This will make navigating the menus easier.
5.4 5.4

Ethernet Setup

Ethernet Setup
5.4 5.4 Ethernet Setup Ethernet Setup
The Ethernet connection, like a reference signal, must be stable and always present. Audio
glitches may be heard on-air if Ethernet is interrupted. Although initially configured for DHCP
(auto-IP address), DHCP can be disabled and a static IP addresses can be entered. We
recommend a static IP so that NfRemote and any PCs that need to access configuration,
metering, control, or logs will always find the AERO.2000 at the same IP address.
To enter a static IP address:
1. Press Left arrow several times to navigate back to the AERO.2000 main menu.
©2016 LINEAR ACOUSTIC INC. THE TELOS ALLIANCE. ALL RIGHTS RESERVED
L16/1/18039
Page 13