Reference; Aes Audio Output Routing - Linear Acoustic AERO.2000 User Manual

AERO.2000 User Guide July 2016
To change the password:
1. Press Left arrow several times to return to main menu.
2. Select System and press Right.
3. Select Network Access and press Right
4. Select Password and press Right
5. Select Password **** and press Right
6. Use the alpha numeric pad to enter a new password. Use rotary to select OK and press
right to save.
Make sure you save your new password somewhere safe!!
5.8.2

5.8.2 Reference

5.8.2 5.8.2 Reference Reference Reference
The AERO.2000 can be referenced to:
AES DARS (or any AES signal applied to the Ref In connector);
•
AES In 1
•
SDI
•
Internal 48 kHz (standalone use only).
•
NOTE!
If SDI embedding is enabled, clock reference will be forced to SDI automatically. If
SDI embedding is Off then a valid reference selection must be made.
5.8.3 5.8.3 AES 5.8.3 5.8.3

AES Audio Output Routing

AES AES Audio Output Routing Audio Output Routing Audio Output Routing
AES output routing is straight forward. Each of the 8 AES digital audio outputs can be assigned
to carry any of the AERO.2000 processed outputs. The processed outputs for a 5.1 Instance
are:
• Off
• Instance 1 Processed 1/2
• Instance 1 Processed 3/4
©2016 LINEAR ACOUSTIC INC. THE TELOS ALLIANCE. ALL RIGHTS RESERVED
L16/1/18039
Page 18