Using Nfremote - Linear Acoustic AERO.2000 User Manual

Audio/loudness manager

Table of Contents

AERO.2000 User Guide July 2016

If NfRemote fails to connect make sure that there is an IP address shown on the unit's front

panel lock display. If the front panel is unlocked use the front panel controls and navigate to:

System > Network Access > IP Configuration and read the IP address here.

Ensure that your PC is in the same subnet and has the same subnet mask and does not have the

same IP address. Ensure that there are no address conflicts in the subnet. If there are still

connection problems connect a PC directly to the AERO.2000 Ethernet port (not the reserved

Ethernet port!). A straight Ethernet cable can be used. Change your PC's Ethernet port IP

address to something in the same subnet and subnet mask as the AERO.2000. After

establishing a connection in this manner you can trouble shoot the network connection.

6.4

6.4 Using NfRemote

Using NfRemote

After successful connection, Nfremote starts at the Home Screen. The remote interface screen

is fully re-sizeable and can be adjusted in the same manner as any MS Windows app screen.

That is, via handles at each corner. The displays and windows will dynamically adjust

themselves to make the best use of available screen real estate as you resize the window.

The first time NfRemote starts it is in Tree navigation mode. Tree navigation works in the same

way that front panel navigation works. Each time you click a menu item it opens the next menu

level and so on down through the menus. Breadcrumbs are shown in the space below the

meters. In Figure 7-4 you are in the Home menu. Home is shown at left below the meters. See

Figure 6-4.

Figure 6-3 NfREmote connection screen

L16/1/18039

Page 27

Table of Contents