Power - Linear Acoustic AERO.2000 User Manual

AERO.2000 User Guide July 2016
4.5

4.5 Power

Power
4.5 4.5 Power Power
The AERO.2000 is equipped with two power supplies (dual redundant internal PSUs). Always
connect BOTH power inlets to clean AC power sources, ideally from separate AC power feeds.
Remember, this is primarily to protect you against unreliable power sources and not from
problems with AERO.2000's power supplies. We strongly recommend using an uninterruptible
power supply (UPS) on at least one if not both of the AC power feeds.
Apply AC power to power on the AERO.2000; there is no power switch. The blue light behind
the Linear Acoustic logo illuminates, the LCD screen shows the Linear Acoustic logo, and fans
turn on. When the menu appears on the LCD screen, startup is complete and the unit is ready
to use. This process may take up to two minutes.
To power off, just remove both AC power cords from the unit.
©2016 LINEAR ACOUSTIC INC. THE TELOS ALLIANCE. ALL RIGHTS RESERVED
L16/1/18039
Page 10