Logs And Control Scripts; Http Server Access - Linear Acoustic AERO.2000 User Manual

Audio/loudness manager

Table of Contents

AERO.2000 User Guide July 2016

8 8 8 8 Logs and

Logs and Control Scripts

Logs and

Your PC 's IP address must appear in the AERO.2000's HTTP white list in order to have access to

the built in HPPT server. If this has not been done yet refer to section 5.5.

The script feature is new to version 3.15.26. A script is a series of parameter change commands

that can be named and saved as a Task. These tasks can then be assigned to any of the

available GPIs. Any command that is available through the AERO.2000 HTTP server, as an IP

based command, can be placed in a script and saved as a task. Now GPI control can be used to

change any parameters, in any combination. The possibilities are nearly infinite.

8.1

HTTP Server Access

8.1

HTTP Server Access

To access the AERO.2000's HTTP server use any browser and enter the AERO's IP address and

the HTTP server port, 7380. For example: 192.168.1.12:7380

MS IE requires the entry of: http://192.168.1.12:7380.

The HTTP server page that will open is shown in Figure 8-1.

Control Scripts

Figure 8-1 HTTP Server Home Page

L16/1/18039

Page 57

Table of Contents