Troubleshooting - Linear Acoustic AERO.2000 User Manual

AERO.2000 User Guide July 2016

10 10 10 10 Troubleshooting

Troubleshooting
Troubleshooting Troubleshooting
AERO.2000 is reliable and easy to install. Most problems turn out to be wiring or configuration
errors. However, it is a powerful processor with many possible configurations and user-
adjustable parameters.
• If you cannot find the source of a problem, simplify the signal path.
• Hard bypass is one of AERO.2000's best troubleshooting features. To instantly remove
AERO.2000 from the signal path, go to:
System > I/O Setup > H/W I/O Setup > Master Bypass and enable the Master Bypass
Master Bypass enables the relay bypass of SDI in to SDI out and each AES input to its
•
corresponding output.
• To remove processing from the signal path but retain the signal flow each DRC can be
switched to bypass. See Fig. 6.1, below.
• Bypass sets all gain control elements to unity. The entire signal path and the latency
is maintained but no processing is active.
©2016 LINEAR ACOUSTIC INC. THE TELOS ALLIANCE. ALL RIGHTS RESERVED
Fig 10-1 DRC Bypass setting
L16/1/18039
Page 79