Nielsen Watermark - Linear Acoustic AERO.2000 User Manual

AERO.2000 User Guide July 2016
Instance x > Source > Input 9/10.
Any AES or SDI input source can be chosen from the drop-down.
This DRC Local UpMAX upmixing processor is intended to work with a stereo audio source.
Upmax can be enabled or disabled manually, by GPI or by IP command. Setup parameters for
the upmix (Main Settings and Adjust) can be set, saved and recalled, independently of the DRC
1 upmix. UpMAX local is only available in AMX5.1 Instances.
6.15 Nielsen 6.15 6.15 6.15 Nielsen Nielsen

Nielsen Watermark

Watermark Watermark Watermark
Nielsen encoding is licensed per AMX Instance. If the Nielsen encoding option is licensed in an
processing Instance then there is a Nielsen encoder for each of the Instance's 3 DRC outputs.
Each Nielsen encoder can use the same or different Nielsen codes. Each Nielsen code requires
Check Digits to enable the channel encoder. Only Nielsen can provide an AERO.2000 user with
the Check Digits.
The Nielsen configuration screen is shown in Figure 6-16.
The tabs for each DRC output can be seen in Figure 7-16. Click Channel 1-6, Channel 7/8 and
Chanel 9/10 to configure Nielsen codes for each output.
Nielsen encoding can be enabled and disabled for each of the 3 outputs. Please note that
Nielsen encoding must be disabled to make changes to the SID or Check Digits.
©2016 LINEAR ACOUSTIC INC. THE TELOS ALLIANCE. ALL RIGHTS RESERVED
Figure 6-16 Nielsen configuration
L16/1/18039
Page 49