Table of Contents
Advertisement
AERO.2000 User Guide July 2016
At the top of NfRemote are displays that indicate the AERO.2000's CPU load, client volume
(streaming audio), headphone volume, and the host PC's CPU load. See Figure 6-4. In some
cases, when the display is made smaller, these controls combine and a drop-down arrow
appears allowing you to activate individual controls.
Note!
In no case should the AERO.2000 CPU load exceed 80% for any length of time.
This should be a rare occurrence and may be due to an excessive number of
simultaneous NfRemote connections.
Click the Menu button (top right) to select Tree or Tabbed navigation, full screen meter display,
lock the window's onscreen position, maximize the window, enter full screen mode, or close
the window. When the display is in meters only mode, place the mouse in any meter window
and left click to return to the NfRemote configuration screen.
To the right of the Menu button are six Display Presets that quickly recall display configurations.
Simply select a display preset from 1 to 6 and configure the display settings. The AERO.2000
remote software first appears with display preset 1 active. Any changes made to the screen
(i.e., selecting between navigation modes, resizing window sections, or choosing the number
and/or type of display windows visible) are automatically saved in real time. Switching back to
this preset, from any other preset, automatically recalls your saved settings. Each Display
©2016 LINEAR ACOUSTIC INC. THE TELOS ALLIANCE. ALL RIGHTS RESERVED
Figure 6-4 Home screen, Tree mode (default)
L16/1/18039
Page 28
Advertisement
Table of Contents
