Linear Acoustic AERO.2000 User Manual page 70

AERO.2000 User Guide July 2016
22. If DRC Local will be used for main program replacement and upmixing of the local input
is desired:
Instance 1 > UpMAX II Local > Load Preset
Instance 1 > UpMAX II Local > Main Settings
Instance 1 > UpMAX II Local > Adjust
23. If Nielsen encoding option is included the setup is found here:
Instance 1 > Nielsen > Channel 1-6, and Channel 7/8 and Channel 9/10.
Note: Only Nielsen can provide the Check Digits necessary to enable the encoder for
each unique SID.
24. Instance1 > Output > Target. This sets the reference level of the loudness meters for
each DRC output. If Dolby encoding is included Target also sets the Dolby dialnorm
metadata value.
25. Instance1 > Output > Dolby Digital Plus Encoder. If the Dolby encoding option is
included, then the settings for Dolby Digital and Dolby Digital + are set in this menu.
26. Instance1 > (any sub-menu) > Display Settings. Any of the available metering can be
configured from this menu. There are 6 instance screen recall presets available. These
are buttons 1 to 6 in the upper right side of the NfRemote display.
27. Instance1 > Output > Loudness Meter. The loudness meter bar-graph displays and
digital readout displays for each DRC output are configured here.
28. Instance1 > Output > Delay. If video delay is set to the nearest full video frame greater
than the audio latency of the AERO.2000 then additional audio delay can be set here for
proper lipsync. LPCM outputs can also be delayed separately from Dolby encoded
output delay to allow both to have proper lip synch at the same time.
29. Client Audio > Client Audio Output > Patch Point. Hardware inputs and outputs and
many other "patch points" within the AERO.2000 can be monitored on a remote PC
using NfRemote. A high quality soundcard and a stereo, or surround, playback system
allows monitoring of the audio while configuration changes are made. NfRemote
provides EQ and other processing to create accurate stereo and surround monitoring
environments wherever the PC is located. If the network connection supports it then
high quality audio streaming is provided.
30. If there is a second Instance, then steps 7 through 28 are repeated for the additional
instance.
©2016 LINEAR ACOUSTIC INC. THE TELOS ALLIANCE. ALL RIGHTS RESERVED
L16/1/18039
Page 56