Linear Acoustic AERO.2000 User Manual page 45

AERO.2000 User Guide July 2016
Note that the display settings for each Instance are unique. All 6 display settings in Instance 1
are entirely independent of the settings in Instance 2. If you have 2 Instances loaded in your
AERO.2000 then display setups will need to be created for Instance 2 as well. All of the meter
setups described here are done in Instance 1. By choosing Instance 2 all of these setups can be
duplicated for the second Instance. The meter configurations described here will be used in the
I/O and preset configuration examples that follow.
To setup display preset 1 start by clicking display preset 1 (next to Menu button) then click on:
1. Instance 1 > Input > Display Settings
2. Display 1 > Common > Hardware I/O
3. Display 2 > Program 1 > DRC-Program 1
4. Display 3 > Program 1 > Loudness Program 1
5. See Figure 6-7
Click display preset 2 and then click:
1. Display 1 > Program 2 > DRC-Program 2
2. Display 2 > Program 2 > Loudness Program 2
3. Display 3 > Program Local > DRC- Local
4. Display 3 > Program Local > Loudness Local
©2016 LINEAR ACOUSTIC INC. THE TELOS ALLIANCE. ALL RIGHTS RESERVED
Figure 6-7 NfRemote Display Preset 1
L16/1/18039
Page 31