Neopost IS-350 Installation Manual page 4

STEP 2
INSTALL POSTAGE METER
A
Open the Mailing System Cover.
Open top cover by lifting at the open slot.
3
B
Remove the PSD (Postage Meter)
from the packaging.
C
Insert the Postage Meter into the
Mailing System.
1. Open the Postage Meter Cover on the
left side.
2. Slide the Postage Meter securely into
the slot, positioning the postage meter
so the contacts are facing the rear of
the system and the locator runner
(ridge) is towards the bottom.
3. Close the Postage Meter Cover.