Table of Contents
Advertisement
6.
After testing eNB operation later in the installation process, you will weatherproof the
GPS and antenna connectors using waterproof daub and waterproof tape. Guidelines for
installing the GPS at the final location are provided in
weatherproofing is provided in
4.4 Install eNB on Pole or Wall
Go to the appropriate section, pole mount or wall mount, for your specific installation.
4.4.1 Pole Mount
After the mounting bracket has been installed on the eNB, per
mounting bracket on the pole as shown in Figure 4-9.
Figure 4-9: Install Mounting Bracket on Pole
Insert vertically the eNB into the mounting bracket on the pole, and fasten using M6 fixed
screws. The completed eNB attachment to the pole is illustrated in Figure 4-10.
section
3.10.
24
section
4.6.1. Information on
section
4.2.1, install the other
Advertisement
Table of Contents
