Figure 3-1: eNB Interfaces
Table 3-3: eNB Interfaces
Interface Name
Description
ACT
Active*
RUN
Operating*
ALM
Alarm*
VSWR
Voltage Standing Wave Ratio (antenna power)*
ANT1
External RF antenna 1, N-female connector
GPS
External Global Positioning System (GPS) antenna, N-female connection
SNF
Reserved for future use
ANT0
External RF antenna 0, N-female connector
ETH0
Ethernet connector 0
PWR
Power connector: +/- 42v to 58V
ETH1
Ethernet connector 1
*When the eNB is powered on, the 4 LEDs provide status indication, described in
16
Table
4-1.