Table of Contents
Advertisement
The panel will arm the Partition then step back to Enter data status and emit a ready beep.
n Global arming
60
Press
to arm all the partitions of the User code in question.
The panel will arm the enabled partitions only then step back to Enter data status and emit a ready beep.
n Disarm Partition
7
Press
then press the partition identifier number key (refer to the MEMO).
The panel will disarm the Partition then step back to Enter data status and emit a ready beep.
n Global disarming
70
Press
to disarm all the partitions of the User code in question.
The Panel will disarm the enabled partitions only then step back to Enter data status and emit a ready beep.
n Alarm reset
8
Press
to reset the alarm memory of the partitions controlled by the entered User code. For the outcome of this
request refer to User menu options.
The Panel will reset the Partition then step back to Enter data status and emit a ready beep.
n Deselect Active status
9
Press
to deselect the Active status of the entered User code.
The deselected code will be unable to control the system until it is restored to Active status (refer to Code pro-
gramming).
1. This security feature allows the User to disable User codes that have accessed the system via telephone, thus
protecting the system against unauthorized use of PINs intercepted by illegal tapping.
9
+
If
is pressed by mistake----press
TELEPHONE OPTIONS
9
again to Undo the error before the call ends.
60
7?
70
8
9
17
Advertisement
Table of Contents
